Rollout for clubstock
4 posters
Page 1 of 1
Rollout for clubstock
Hi guys
Can anybody please help me out.
What is a good rollout for a clubstock car at drccc?
Thanks
Can anybody please help me out.
What is a good rollout for a clubstock car at drccc?
Thanks
AndrewH- Hitch hiker
- Posts : 92
Join date : 2011-01-23
Age : 40
Re: Rollout for clubstock
Hi andrew anything from 45 to 49 all depends how hot your`e motor runs i run a 47 and my car is cappable of running in the 21 seconds all deppends on how bad or good i ride there is a base line for u to start on.
Bossman- Learner Driver
- Posts : 205
Join date : 2010-11-25
Age : 52
Location : Port Elizabeth
Re: Rollout for clubstock
Thanks Bossman
Will give it a bash, might see you on the start line
What size tyres are you guys running?
Will give it a bash, might see you on the start line
What size tyres are you guys running?
AndrewH- Hitch hiker
- Posts : 92
Join date : 2011-01-23
Age : 40
ototw- taxi driver
- Posts : 614
Join date : 2010-11-20
Re: Rollout for clubstock
The bigger the tyre the bigger the rollout i trim down wht i got then compensate with pinnions to get rollout right the more experienced guys preffers to run a smaller tyre. I dont know the reason behind it.
Bossman- Learner Driver
- Posts : 205
Join date : 2010-11-25
Age : 52
Location : Port Elizabeth
Re: Rollout for clubstock
Rolling weight or resistance or something like that, also less sidewall movement while cornering which slows the car down??? But ja, the top guys prefer smaller tyres, me, I couldn't shave my tyres, it's like throwing money into the wind.
the DJ- taxi driver
- Posts : 1006
Join date : 2010-11-29
Location : The Mother City
Re: Rollout for clubstock
most cars handle better on smaller tyres and it reduces rotating mass using smaller tyres. the same rollout can almost always be acchieved by playing around with pinions or spurgears. for a new guy I would suggest starting on a safe rollout of 42mm/rpm and then moving up while monitoring motor temp and accaleration out the slower turns.
Guest- Guest
ototw- taxi driver
- Posts : 614
Join date : 2010-11-20
Re: Rollout for clubstock
I also started on a 42 and then worked my way up and I think I have found a rollout that works for me. I also went for a bigger spur which seemed to help. Thanks for all the advice guys definitely helped a lot and took the frustration out of it.
AndrewH- Hitch hiker
- Posts : 92
Join date : 2011-01-23
Age : 40
Re: Rollout for clubstock
ototw wrote:I started on a 42 and the cars flew past me ,and up till date I could not figure out what roll out is the best,take in mind,some guys lapped me twice in a race,I just could not get it right so good luck,
some people start at 42 and burn their motors out so it's merely a fairly safe benchmark. Nicole had a victory this weekend by some margin on 42.5 rollout. All motors are different, keep that in mind.
Guest- Guest
Re: Rollout for clubstock
And you gotta keep it on the black stuff!!
the DJ- taxi driver
- Posts : 1006
Join date : 2010-11-29
Location : The Mother City
Roll out
Well done ,Nicole!!!
Last edited by ototw on Fri Apr 22, 2011 4:37 am; edited 1 time in total (Reason for editing : spelling mistake)
ototw- taxi driver
- Posts : 614
Join date : 2010-11-20
roll-out
What chassis does Nicole race with?
Last edited by ototw on Fri Apr 22, 2011 4:39 am; edited 1 time in total (Reason for editing : spelling mistake)
ototw- taxi driver
- Posts : 614
Join date : 2010-11-20
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|